| Míreanna | Cumas |
| aicmiú boird | Bonn Alúmanam, Copar Bonn, Bonn Iarainn, bonn ceirmeacha copar-chumhdaithe, Bord Bade Comhcheangailte |
| ábhar | Intíre Alúmanam, Copar Baile, alúmanam lmported, copar lmported |
| cóireáil dromchla | HASL/ENIG/OSP/airgead a thabhairt |
| cuntas ciseal | bord clóite aon-thaobhach/bord clóite dhá thaobh |
| maxi.board Méid | 1200mm*480mm |
| min.board Méid | 5mm*5mm |
| leithead rian/gabháil | 0.1mm/0.1mm |
| dlúith agus casadh | <=0.5% (tiús: 1.6mm,Bord Méid: 300mm*300mm) |
| tiús boird | 0.5mm-5.0mm |
| tiús amadán copair | 35um/70um/105um/140um/175um/210um /245um/280um/315um/350um |
| Caoinfhulaingt céime V-CUT | Ródú CNC: ± 0.1mm; punch: ± 0.1mm |
| Clárú V-CUT | ±0.1mm |
| Tiús copair balla poll | 20um-35um |
| Min clárú suíomh poll (campaer le sonraí CAD) | ±3mil(±0.076mm) |
| Min.punching poll | 1.0mm thíos, 1.0mm (Tiús an Bhoird faoi bhun 1.0mm, 1.0mm) |
| Min.punching sliotán cearnach | 1.0mm thíos, 1.0mm * 1.0mm (Tiús boird faoi bhun 1.0mm, 1.0mm * 1.0mm) |
| Clárú ciorcad priontáilte | ±0.076mm |
| Trastomhas poll Min.drill | 0.6mm |
tiús cóireála dromchla | óir plating: Ni 4um-6um,Au0.1um-0.5um ENIG: Ni 5um-6um,Au:0.0254um-0.127um airgeadú: Ag3um-8um HASL: 40um-100um |
| Caoinfhulaingt céime V-CUT | ±5(Céim) |
| Bord V-CUT tiús | 0.6mm-4.0mm |
| Min.Lefend leithead | 0.15mm |
| Oscailt masc Min.Solder | 0.35mm |